Jasa Kalibrasi – Kabar baik untuk anda pelanggan setia BMD Laboratory, mulai 1 Juli 2020 jasa kalibrasi cabang yogyakarta dan sekitarnya telah dibuka. Jasa Kalibrasi Murah yang kami sediakan ini memberikan pelayanan mencakup wilayah: Bantul, Kulonprogo, Klaten, Magelang, Temanggung, Semarang, Jepara, Kendal, Solo, Sragen, cilacap, bumiayu, purwokerto, pekalongan, pemalang, tegal, brebes, indramayu, purworejo dan lain sebagainya. Masih sesuai GOAL ORGANISASI perusahaan kami, dimana pelayanan kami siap memberikan yaitu:
- Jasa Kalibrasi KAN, maksudnya yaitu jasa kalibrasi yang kami sediakan terakreditasi KAN sehingga apabila diterbitkan sertifikat maka akan berlogo KAN. Jika ada pelanggan tidak mempersyaratkan kami untuk menerbitkan sertifikat kalibrasi berlogo KAN untuk beberapa alat ukur industri/laboratorium kami pun siap membantu. Tentunya dengan harga terjangkau, pelayanan cepat dan program edukasi yang menunjang kebutuhan pengetahuan pelanggan.
- Jasa Kalibrasi Murah, kalibrasi harus memberikan solusi salah satunya harga yang sesuai dengan kebutuhan dan kemampuan pelanggan. Saat ini harga yang relatif mahal cenderung membuat pelanggan mengabaikan kalibrasi dalam QC/QA di proses jaminan mutu. Sehingga produk gagal, komplain, persaiangan dalam industri semakin tinggi. Dengan Jasa Kalibrasi Murah yang kami berikan, kami tetap setia memberikan pelayanan kepada anda, namun bukan murahan akan tetapi tetap kepada goal perusahaan kami yaitu fokus kepada akurasi dan kepresisian hasil pengukuran.
Bagi pelanggan yang membutuhkan jasa kalibrasi cepat, untuk area yogyakarta, jateng dan jatim dapat datang/menghubungi kantor cabang pemasaran kami yang beralamat di
Cab. Pemasaran Yogyakarta | Jateng | Jatim
Untuk bertemu, atur janji, request pekerjaan, kalibrasi cepat, bantuan teknis dan operasional silahkan berkoordinasi dengan staff kami diatas. Adapun daftar alat ukur, alat laboratorium, alat survey dan alat medis yang dapat kami lakukan kalibrasinya baik yang telah terakreditasi ISO/IEC 17025:2017 KAN dengan No. Registrasi LK-232-IDN dan yang tidak akan dilakukan oleh lab rekanan:
| No |
Jenis/Nama Alat/Aplikasi |
Range/Kapasitas |
Ket |
| Lingkup: Suhu |
| 1 |
Temperatur Sensor With Display |
0°C – 1000°C |
– |
| 2 |
Waterbath |
0°C – 100°C |
– |
| 3 |
Oil Bath |
0°C – 200°C |
– |
| 4 |
Oven |
Mak. 200 °C |
– |
| 5 |
Autoclave |
Mak. 200°C |
– |
| 6 |
COD Reaktor |
Mak. 1000°C |
– |
| 7 |
Heating Digestion |
Mak. 1000°C |
– |
| 8 |
Nitrogen Evaporator/ waterbath |
Mak. 1000°C |
– |
| 9 |
Thermo Heating Block |
Mak. 1000°C |
– |
| 10 |
Destilasi/Destilator |
Mak. 1000°C |
– |
| 11 |
Chiller |
-35°C – 0 °C |
– |
| 12 |
Show Case |
Ambient – 30°C |
– |
| 13 |
Kulkas |
-35°C – 0°C |
– |
| 14 |
Inkubator |
30°C – 80°C |
– |
| 15 |
Destruksi Protein |
Kap. 1000°C |
– |
| 16 |
Freezer/Refrigerator/Cold Storage |
-20°C – 30°C |
– |
| 17 |
Furnace |
Max. 1000°C |
– |
| 18 |
Thermohygrometer |
Suhu 15 – 40°C, RH 30-90% |
– |
| 19 |
Termometer Glass/Analog |
Suhu – 35 to 200°C |
– |
| 20 |
Termometer Tahanan Platina (Sensor, PT100) |
Mak. 1000 °C |
– |
| 21 |
Sensor Termokopel Wire |
Mak. 1000 °C |
– |
| 22 |
Termometer Infra red |
30 to 500 °C |
– |
| 23 |
Termometer Digital |
Mak. 1000°C |
– |
| 24 |
Termometer Karamel |
Mak. 1000°C |
– |
| 25 |
Termometer Tusuk/Dinding/Ruangan |
Mak. 1000°C |
– |
| 26 |
Termometer Truck |
Mak. 1000°C |
– |
| 27 |
Temperatur Transmitter |
Mak. 1000°C |
– |
| 28 |
Anteeroom Thermometer Digital |
1000°C |
– |
| 29 |
Frozen Room Thermometer Digital |
1000°C |
– |
| 30 |
Chiller Room Thermometer Digital |
1000°C |
– |
| 31 |
Heat Sealer |
Mak: 1000°C |
– |
| 32 |
Data Loger |
Mak: 1000°C |
– |
| 33 |
Termometer Analog Payung |
Mak: 1000°C |
– |
| 34 |
Dry Bath |
Mak: 1000°C |
– |
| 35 |
Honeywell Cooking |
Mak: 1000°C |
– |
| 36 |
Fryer |
Mak: 1000°C |
– |
| 37 |
Boiler/Heat Exchanger/Evaporator/Cooling Tower |
Mak: 1000°C |
– |
| 38 |
Steamer |
Mak: 1000°C |
– |
| 39 |
BOD Inkubator |
Mak: 1000°C |
– |
| 40 |
Infra Red Termometer |
Mak: 1000°C |
– |
| 41 |
Digital Termometer |
Mak: 1000°C |
– |
| 42 |
Heating COD Reaktor |
Kap. 200oC |
– |
| 43 |
Melt Flow Index |
Mak: 1000°C |
– |
| 44 |
Moisture Analyzer |
Ambient – 1000oC |
– |
| Lingkup: Massa |
| 1 |
Anak Timbangan |
Kelas E2, Mak: 1mg – 500g |
– |
| 2 |
Anak Timbangan |
Kelas F1, Mak: 1mg – 500g |
– |
| 3 |
Anak Timbangan |
Kelas F2, 10 Kg |
– |
| 4 |
Anak Timbangan |
Kelas M2, 30 Kg |
– |
| 5 |
Anak Timbangan |
Kelas M1, 30 Kg |
– |
| 6 |
Micro Balance |
Res: 0.000001 mg |
– |
| 7 |
Semi Micro Balance |
Res: 0.00001 mg |
– |
| 8 |
Timbangan Analitik |
Resolusi: 0,0001 mg |
– |
| 9 |
Timbangan Digital/Duduk/Mekanik/Gantung/ |
Kapasitas Mak. 10 Ton |
– |
| Lingkup: Volumetrik |
| 1 |
Gelas Ukur |
Range: 5 – 4000 ml |
– |
| 2 |
Labu Ukur |
Range: 5 – 5000 ml |
– |
| 3 |
Pipet Ukur |
Range: 1 – 50 ml |
– |
| 4 |
Pipet Gondok |
Range: 1 – 200 ml |
– |
| 5 |
Buret |
Range: 5 – 100 ml |
– |
| 6 |
Piknometer |
Range: 1 – 100 ml |
– |
| 7 |
Dispensi |
Range: 1 – 1000 ml |
|
| 8 |
Botol Winkler |
Range: 1 – 1000 ml |
|
| 9 |
Repeater Pipet |
Range: 1 – 1000 ml |
|
| 10 |
Labu Cassia |
Range: 1 – 1000 ml |
|
| 11 |
Mikropipet |
Range: 2 – 200 mikron |
|
| 12 |
Bejana ukur |
Range: 1000 – 20000 ml |
– |
| Lingkup: Alat Uji Kimia/Instrumen Analitik/Alat Bantu Laboratorium |
| 1 |
Spektrofotometer UV/VIS |
241nm – 890nm |
– |
| 2 |
pH meter |
4, 7, 10 |
– |
| 3 |
Turbidimeter |
Mak. 1000 NTU |
– |
| 4 |
Conductivity |
1.408µS/cm, 12.817µS/cm,
108.600µS/cm |
– |
| 5 |
Dissolve Oxygen Tester (DO Meter) |
6,25 mg/L (ppm) |
– |
| 6 |
AAS (Atomic Absorption Spetrofotometri) |
– |
Verifikasi |
| 7 |
Gas Chromatography) |
– |
Verifikasi |
| 8 |
HPLC (High Performance Liquid Chromatography) |
– |
Verifikasi |
| 10 |
Inductance Couple Plasma ICP |
– |
Verifikasi |
| 11 |
Refraktometer |
10, 30 dan 60 Brix |
– |
| 12 |
Diluter |
– |
– |
| 13 |
PCR |
– |
– |
| 14 |
Polarimeter |
– |
– |
| 15 |
TDS |
– |
|
| 16 |
Kjeltec Auto |
– |
– |
| 17 |
Soxtec |
– |
– |
| 18 |
Laminar Air Flow (Verifikasi) |
Intensitas Cahaya, Paparan Gas, Daya Hisap, Kebisingan |
– |
| 19 |
Flame Photometer |
– |
– |
| 20 |
Colorimeter |
– |
– |
| 21 |
Mesin Chikka |
– |
– |
| 22 |
Suchromat |
– |
– |
| 23 |
Ultrapure Water |
– |
– |
| 24 |
Salinitas |
– |
– |
| 25 |
Ultrapure Water |
– |
– |
| 26 |
Daktilometer |
– |
– |
| 27 |
Saybolt Furol |
– |
– |
| 28 |
Chlorine Meter |
– |
– |
| 29 |
Centrifuge |
Range: 0 – 99.000 rpm |
– |
| 30 |
TSS Meter |
– |
– |
| 31 |
Gas Detector |
Oxygen (O2), Methane (Ch4), Carbon Monoxide (CO), Hidrogen Sulphide (H2S) |
– |
| 32 |
Gas Analyzer |
Oxygen (O2), Methane (Ch4), Carbon Monoxide (CO), Hidrogen Sulphide (H2S) |
– |
| 33 |
Viscometer (Alat Ukur Kekentalan) |
Max. 76183 cP |
– |
| Lingkup: Waktu/Frekuensi |
| 1 |
Stopwatch |
60Sec |
– |
| 2 |
Jam Dinding |
60Sec |
– |
| 3 |
Timer Pada Mesin |
60Sec |
– |
| 4 |
Frequency Counter |
10 Hz ~ 3.2 GHz |
– |
| 5 |
Frequency Source |
5 MHz, 10 MHz |
– |
| 6 |
Synthesized Signal Generator |
10 Hz ~ 1300 MHz |
– |
| 7 |
Stroboscope |
60 ~ 20.000 rpm |
– |
| 8 |
Tachometer |
30 ~ 99.000 rpm |
– |
| 9 |
Spectrum Analyzer |
10 Hz ~ 1300 MHz |
– |
| 10 |
Multiproduct Calibrator |
10 Hz ~ 2 MHz |
– |
| 11 |
Plug Tester (Magnet Tester) |
– |
– |
| 12 |
Digital Hand Held Pocket Refractometer |
– |
– |
| 13 |
Black Light Meter |
– |
– |
| 14 |
Lux/Light Meter |
– |
– |
| 15 |
RPM Meter |
|
|
| Lingkup: Tekanan |
| 1 |
Presure/Test Gauge |
Range 1 – 60 Bar |
– |
| 2 |
High Presure Gauge (Peneumatic/Hidraulik) |
Range 1 – 1000 Bar |
– |
| 3 |
Regulator Oksigen |
– |
|
| 4 |
Vacum Gauge |
Range -0.75 sampai 0 bar |
– |
| 5 |
Differential Presure |
Range 1 Kpa – 1000 Pa |
– |
| 6 |
Presure Transmitter |
Range 1 – 250 Bar |
– |
| 7 |
Tensi Meter Raksa |
Range 0 – 250 mmhg |
– |
| 8 |
Digital Tensi Meter |
Range 0 – 250 mmhg |
– |
| 9 |
Autoclave |
Mak. 60 Bar |
– |
|
|
|
– |
| Lingkup: Dimensi |
| 1 |
Ultrasonic Thickness Gauge |
Range 0 – 25 mm |
– |
| 2 |
Steel Ruler |
Range 0 – 2000 mm |
– |
| 3 |
Rool Tape/Meteran |
Range 0 – 20.000 mm |
– |
| 4 |
Out Side Micrometer |
Mak: 25 mm |
– |
| 5 |
Thickness Gauge |
Mak: 25 mm |
|
| 6 |
Caliper/Jangka Sorong Mekanik |
Mak: 300 mm |
– |
| 7 |
Height Gauge |
Kap. Mak:600mm |
– |
| 8 |
Roughness Machine (Precision Roughness Specimen) |
– |
– |
| 9 |
Gauge Block |
Mak. Grade 0 |
– |
| 10 |
Ring Gauge |
>150 mm |
– |
| 11 |
Squere Ruler |
<600mm |
– |
| 12 |
Theodolite Mekanik |
Kap. 60” |
– |
| 13 |
Theodolite Digital |
Kap. 60” |
|
| 14 |
Auto-Level |
Kap. Mak:6mm/1000mm |
– |
| 15 |
Tilting-Level |
Kap. Mak:2mm/1000mm |
– |
| 16 |
Jangka Sorong/Vernier Caliper/Sigmat |
Kap. Mak: 300mm |
– |
| 17 |
Depth Caliper |
Kap. Mak. 300 mm |
– |
| 18 |
Straight edge/Besi Pelurus |
Kap. Mak: 500mm |
– |
| 19 |
Dial Test Indicator |
Kap. Mak:30mm |
– |
| 20 |
Dial Indicator |
Kap. Mak:30mm |
|
| 21 |
Pin Gauge |
Kap. Mak:30mm |
– |
| 22 |
Plug Gauge |
Kap. Mak:30mm |
– |
| 23 |
Water Pas |
Kap.Mak:500mm |
|
| 24 |
Meteran Tinggi Badan |
Kap. Mak: 750-1900 mm- |
|
| 25 |
Thread Plug gauge |
– |
|
| 26 |
Mal Ulir |
1/2G |
– |
| 27 |
Bore Gauge |
Kap. Mak:10mm |
– |
| 28 |
Dial/Digital Thickness Gauge |
Kap. Mak:30mm |
– |
| 29 |
Profil Projector |
Kap. Mak:300mm |
– |
| 30 |
Measuring Microscope |
Kap. Mak:300mm |
– |
| 31 |
Hammer Test |
– |
– |
| 32 |
Laser Worker Level |
– |
– |
| Lingkup: Gaya/Force |
| 1 |
Torsimeter/Torque Meter |
Kap. Mak: 5000Nm |
– |
| 2 |
Torsi Wrench/Torque Wrench |
Kap. Mak: 5000Nm |
– |
| 3 |
Tensil Bonding Strenght |
Kap. Mak: 5000Nm |
– |
| 4 |
Pushpull |
Kap. Mak: 50Kgf |
– |
| 5 |
Tension Gauge |
Kap.Mak:5Kgf |
– |
| 6 |
Presure Test Gauge |
60 Bar |
– |
| 7 |
Presure Gauge |
60 Bar |
– |
| 8 |
Dial Torque |
Mak. 1000 Nm |
|
| 9 |
Klem Wire Rope, Climbing |
113.4 Kg |
Verifikasi |
| 10 |
Stength Tester |
0-4000N |
– |
| 11 |
Strength Fen |
0-21 N |
– |
| 12 |
Uniaxial Testing Machine
- Push (Tekan)
- Pull (Tarik)
|
Mak. 900 Kgf |
|
| Lingkup: Kelistrikan |
| 1 |
AC Voltmeter |
Kap. Mak:1000V |
– |
| 2 |
DC Voltmeter |
Kap. Mak:1000V |
– |
| 3 |
AC Amperemeter |
Kap. Mak:20A |
– |
| 4 |
DC Amperemeter |
Kap. Mak:40A |
– |
| 5 |
Resistance |
Kap. Mak:5MW |
– |
| 6 |
Distorsi |
– |
– |
| 7 |
Phase Detector |
– |
– |
| 8 |
Multimeter |
– |
– |
| 11 |
Cable Grounding Tester |
– |
– |
| 12 |
Hybrid Recorder |
– |
– |
| 13 |
Cable Locator |
– |
– |
| 14 |
Aperless Recorder |
– |
– |
| 15 |
Rotating Laser |
– |
– |
| 16 |
Digital Environment Multimeter |
– |
– |
| Lingkup: Akustik & Vibrasi |
| 1 |
Accelerometer |
Kap. Mak:5kHz |
– |
| 2 |
Sound Calibrator |
Kap. Mak:114 dB@250Hz |
– |
| 3 |
Audiometer |
Kap. Mak:120dB |
– |
| 4 |
Loudspeaker |
Kap. Mak:16kHz |
– |
| 5 |
Absorption Coef (Koefisien Absorpsi Bahan) |
0 ~ 100% ABS |
– |
| 6 |
Microphone 0.5 inch |
31.5 Hz ~25 kHz |
– |
| 7 |
Microphone 1 inch |
63 Hz ~ 8 kHz |
– |
| 8 |
Noise Level (Tingkat Kebisingan) |
25 ~ 130 dB |
– |
| 9 |
Pistonphone |
124 dB @ 250 Hz |
– |
| 10 |
Sound Level Meter |
20 ~ 140 dB |
– |
| 11 |
Sound Power |
100 Hz ~ 10 kHz |
– |
| 12 |
Vibration Meter |
0.3 g ~ 15 g |
– |
| 13 |
Vibration Test |
0.3 g ~ 15 g |
– |
| 14 |
Vibration Test System |
0.3 g ~ 15 g |
– |
| Lingkup: Aliran (Udara) |
| 1 |
Anemometer |
Mak. 20 m/s |
– |
| 2 |
Wind Tunnel |
Mak. 20 m/s |
– |
